S360 Bikers

Must know tips to Increase Bike Mileage

Long highway rides are all riders want, and it’s also becoming the norm for young riders. Sometimes, it’s hard to maintain a bike’s performance and irritates when you have to rev the engine one moment and ride at low speed the next. 


Thus, to protect your bike from these problems, you must learn how to increase the mileage and maintain it for a long time. Some self-help tips will be helpful in this situation since they are easy to implement and should be performed regularly.


Therefore, the following write-up should assist you with how to increase your bike mileage and how to maintain it properly.

Factors that Affect Bike Mileage 

With fuel prices rising, it’s more important than ever to maintain your bike’s fuel efficiency and mileage. 

Here is a list of the factors which affect it: 

  • Low Pressure of Tyres – Having less pressure and PSI with your tyres than specified requirements will make the engine work more. This will result in reduced mileage. Both the front and rear tires should be inflated to different PSIs. Moreover, if both tires lack user manuals, it causes problems with working.


  • Adding Accessories – The addition of accessories will increase the engine’s weight, causing it to work harder and consume more fuel. As a bike rider obsessed with modifying bike accessories, decreasing mileage is one of the most common factors in your case.


  • Unnecessary Gear Shifting – The riders change gear too often, i.e., up-shifting two or three gears in succession. This constant changing of gear is a bad habit and will negatively affect the mileage. 


  • Chain Is Loosened – The rear wheel will not turn correctly in the absence of smooth chain transmission. This is because the power will not be transferred from the engine to the rear wheel. Even when tightened, the chain can slip again.


  • Not Using the Right Fuel – Sometimes it’s recommended to fill up normal fuel, while other times it’s recommended to fill up speed or power fuel. Fuel that is filled up differently than recommended can affect mileage.


  • Masked Spark Plugs – If there are deposits on the layer of the spark plug, it would be difficult for the plug to join the engine. Engine components that ignite the combustion in the combustion chamber are one of the most overlooked.


  • Not Servicing The Bike Frequently – In the absence of routine maintenance for up to 6 months, the bike will perform at a low level, and greasing, brake pads, and carburetor dirt will have the largest impact on mileage than any other parameter.


  • Low Engine Oil Level – Insufficient lubrication and cooling components will cause the engine to overheat, which will have an adverse effect on the bike’s fuel economy and mileage.


Having read factors affecting bike mileage, you may now have some tips that will assist you with improving your bike mileage. 

Tips to Increase Bike Mileage

Some useful tips to increase bike mileage are outlined below:


Sudden Acceleration 

The biggest impact on mileage comes from the sudden acceleration and heavy braking. Acceleration that occurs rapidly, at high speeds, or with high RPMs burns the fuel quickly. Thus, when accelerating slowly, gear shifting with the right RPM is essential; heavy braking will also cause a loss of fuel.



It is advisable to ride your bike at a constant speed. Many bikes feature an economy speed setting, which is reflected on the speedometer. When you control your speed with your throttle rather than your brakes, you will cover more miles without reducing your mileage.


Heavy Traffic Roads

Roads with heavy traffic should not be taken. The constant shifting of gears in heavy traffic burns petrol. In the same scenario, switching gears slowly and switching off the engine where necessary will help. As for riding on highways, you need to consider the make and model of your bike. If it’s a 100cc computer bike, its speed limit must be between 60-70 kph.  


Carburetor Issues 

Deterioration of bike mileage is caused mostly by carburetor issues. Be sure it is not tuned or covered in dirt, as this will cause heavy fuel loss for your bike. To improve one’s mileage, keep the carburetor clean and adjusted. Retuning the carburetor manually or electrically can also improve engine performance.


Gear Shifting 

If you frequently shift gears, you will put a heavy strain on the clutch, causing it to damage or adversely affect your mileage. The engine and clutch pad can be damaged by quick gear shifting or shifts at high RPM and driving in low gears. You can overcome this by avoiding rapid gear changes.


Lubricate Chain 

As the chain becomes dirty from dust or sand, the engine takes more power to rotate it, and as a result, a lot more fuel will be absorbed. Thus, to maintain optimum fuel consumption, make sure to lubricate the chain regularly. 


Tyre Pressure 

Low tyre pressure will require more energy to run. As the bike uses more power, the engine will be under more stress, resulting in less mileage. Managing your tyre pressure frequently and avoiding bursts is one way to prevent this. Tyre pressure affects mileage greatly. Less air pressure will result in more friction, so ensure you have the proper tyre pressure recommended by your vehicle’s manufacturer.


Engine Oil

Engine oil is the most important part of your bike, so regularly check it since bad engine oil will reduce mileage. In contrast, if you plan to fill up your petrol tank before heading to a petrol station, go early in the morning. Generally, petrol is charged based on volume. Thus, if it’s late in the day and the temperatures are high, then you might be giving less fuel because sunlight affects fuel consumption a lot and doesn’t make it fill to the top. Make sure to fill with good quality fuel because the fuel that’s impurity-ridden will lower the mileage.


Extra Weight 

Your bike will consume more fuel if you have added more weight since it is forced to work harder to respond. Therefore, you should avoid adding weight such as oversized horns, excessively heavy guards, and modified fair attachments so that the bike can have a greater output. 


Tips to Maintain Bike Mileage 

  • Regular service of your bike after a few thousand miles.
  • The bike’s tire should be checked since flat tires consume more fuel than usual.
  • Check the carburetor setting to restore the performance of the engine.
  • Fuel should be of good quality and should not be loaded.
  • Avoid rash and revving driving.
  • Avoid spark’s plug being dirty, so keep it clean. Otherwise, the bike will start to smoke.
  • Avoid overfilling of the tank.


Final Thoughts!

Lastly, there are several ways to increase bike mileage; refer to them and see what works for you. Also, you should never replace original parts when making modifications since manufactured parts have a lower engine performance, so you will end up using more fuel. If you are still facing a low mileage issue you can contact S 360 BIKERS for motorcycle engine tuning works in Wakad locality.


Post a Comment


S 360 Bikers has a team of expert motorcycle mechanics and facilitates professional 2-wheeler servicing in Hinjewadi and Waked locality with free pickup and drop services.

+91-7517 360360 +91-8459 741337
whatsapp button
Call Now